for a router can provide a good connection to Internet Inside a house or apartment, it is necessary to establish a suitable location in which the signal can reach all spaces in a sustained manner.
However, sometimes it is not possible for the signal to Wifi Arrive with the ideal power that allows all devices to operate smoothly. Either because the speed and the amount of data in the servicillegue with the ideal power that allows all devices to operate smoothly.
Faced with these situations, it is possible to find a solution: increase the output power of the sign.
Most of the routers have this setting available, so you can follow these steps to be able to give a solution to the problems of Connection without the need to invest in repeaters or other additional devices because, although these devices other delicate functions cannot be accessed to avoid malfunction, yes they can be used settings advanced like this
The first thing to do to set up the router in this way is to access, through a browser, the address of the link of the device that is nothing more than the address IP of the network Wifi. To view it, users can enter the connection settings from a cell phone that is currently linked to the net and consists of a series of 4 numbers in the following format: 123.456.7.89.
On the main screen you will see an option that will allow you to change the mode of settingwhich will need to be changed to “expert” or “advanced”.
After entering this section, the user must look for the configuration Wifiwhich may be displayed as “Wi-Fi”, “Wi-Fi” either “Connection wireless”, which will allow access to sections for each type of network compatible with the router. These can be 2.4 GHz and 5 GHz, but the procedure for both is the same.
In the section corresponding to the network that you want to modify, you will find an option called “Power signal strength” or also “Signal strength”. Some routers They present it as “Adjustment of the transmission power”, but the functions of all are the same and correspond to the signal of Wifi emitted by the devices.
In all cases, this will show a value that can be modified between low, medium and high, so the user must set the highest rating to increase the power of the signal. Wifi.
Once this value has been modified by the user, the button must be clicked. Apply and then in the Save so that the new configuration is established in the device. Upon completion, the user must restart the router to make sure the changes are applied. Some Models do not require this last step to be able to see changes in the power Of the signal.
In the event that the router persists in the problem of not emitting a strong signal of Wifiusers can check whether the manufacturer or operator allows modifications to the power value of the device. In case the answer is no, then the remaining solution is to acquire a amplifier signal or a repeater.
How to know if my cell phone can access high-speed Wi-Fi connections
WiFi 6: how it differs from previous versions and which devices work with this technology
Most people in Latin America depend on public Wi-Fi, study finds