There is no doubt that white walls are aesthetic, combinable and bright. However, they can present a problem when cleaning. Follow these tips to leave them like new.
Have the necessary tools
Removing a specific mud stain is not the same as carrying out a general cleaning or dust removal.
For this reason, it is important to identify the type of sanitization that you want to perform.
For general cleaning, a sponge, paper napkins, a towel, and a microfiber cloth will suffice.
For more complex stains use baking soda, all-purpose cleaners, dish soap, and a scrub brush.
If cleaning products with mixtures between them are going to be used, it will be advisable to wear latex gloves to protect the skin.
Buy special products for sticky stains
In the case of stains related to food, drink and any similar element, it is advisable to apply an all-purpose cleaning product.
Using a cloth or paper towel, placing these degreasers is often effective in whitening walls with sticky spots.
Clean from top to bottom
Both for white walls and to avoid traces of dust, it is recommended to remove the dirt from top to bottom.
In this way, everything accumulated in the upper part falls to the ground and then it is cleaned.
To remove dust from white walls, just wipe it with a damp microfiber cloth.
For the upper parts, the cloth can be adjusted to a broom or other similar element, which serves to reach those spaces.
It is important to soak the item constantly.
This prevents grime from building up on the cloth and spreading all over the wall.
magic eraser
This is a tool that should only be applied in extreme cases, since the magic eraser is an abrasive object.
It is made of melamine foam and acts in a similar way to sandpaper.
Therefore, it may damage some surfaces if applied with great force. It is not recommended on shiny walls.
However, by moistening and gently scraping, the magic eraser is capable of removing complex stains.
Detergent for tough stains
In more complex instances of cleaning, it is possible to use dish soap or detergent.
It is a product that is rarely applied outside of its main function, however, it is effective on surface stains that do not come off with other cleaners.
Placing a drop of detergent on a sponge and applying it to the stain, rubbing gently until foam is generated, is ideal. Then let it rest for a few minutes.
Once the product has been absorbed by the wall, go over the area with a microfiber cloth dipped in lukewarm water. If the stain did not come out completely, repeat the process.
Sodium bicarbonate
A multipurpose product that is also effective for cleaning is baking soda.
In the case of white walls, it should be applied with a method similar to that of detergent.
First, mix in a container 3 tablespoons of baking soda and 1 of water.
A paste with a sticky consistency should be generated.
Then, place it on the stain until it is completely covered.
Let it sit for longer than the detergent and, once it is dry, rub it with a microfiber cloth.
specific spots
Some marks are generated by the frequent circulation of dust or rubbing against the furniture, but there are also stains caused by specific accidents:
Fingerprints: It’s common for fingerprints to appear on walls near doors, key fobs, or light switches.
In general, these marks are removed with all-purpose cleaning products. It is important not to moisten the area or the cloths so much.
If you are near a light circuit, cut off the electricity beforehand.
Ink or blood stains: these are quite complex stains to remove. Using bleach or bleach can be effective.
However, the white wall must not have decorative motifs and the product must be diluted with water, in the proportions indicated by the manufacturer.
Apply using a cloth and protective gloves.
Pencil Marks: There is an easier solution to this problem.
Pencil marks are usually removed with a simple eraser. Bread crumb gum would do.
Moisture: stubborn moisture stains can also be removed using bleach.
Applying it with a hard bristle brush and always wearing a mask, along with hand and eye protection, is recommended.
The bleach must be diluted in at least 3 measures of water for each measure of bleach.